B station nibbling rib die

TR010207-stengthen rib forming tool
 
Nibbling Strengthen Rib Tool
 
1.Nibbling strengthen rib is divided into into linear type and curved type.
2.Linear type punching pace can be adjusted according to product’s effect, the suggested pace is 0.5-2.0mm.
3.Curved type is restricted by the min.arc when punching, the min.diameter should be larger than 2 times plate thickness.
4.After processing, there will be a slight nibbling impression, to reduce the nibbling pace may mitigate the impression.
5.Mold is correspondent with plate thickness, different plate thickness requires different mold, otherwise the impression of the nibbling process will be very clear.
6.Process sheet thickness: steel plate and alum plate 2.7mm, stainless steel 2.3mm.
7.Forming position should keep proper space with punching hole, plate edge and clamp.
 
 
 
Rib Rolling Tool
 
1. CNC punch press must have relative operation system and control program.
2. Can process curve, arc and fillet on the rotation station (auto index).
3. After processing, there’s no sawtooth mark and impression, both upper and lower roller making coating treatment, and can be changed seperately.
4. Different plate thickness requires defferent mold, customer only need to order upper and lower roller assembly, that will save much money.
5. High-speed forming equal to X and Y axis’ high-speed moving on the machine table.
6. The min.turning radius is R40mm, the turning radius has no relation ship with forming width.
7. Process range: stainless steel 0.8-1.5mm, carbon steel 0.8-2.0mm, alum plate 0.8-2.5mm;
  Forming height:2-3 times of plate thickness, the width is 2 times of the height, the max. width is 12.7mm.